Model

Climbing volumes

A long-standing idea for visualizing climbing volumes and measuring panel cuts before fabrication. It has not yet been validated by building a volume.

Size and material

Panel adjustments and inner supports

Independent primary tilts

Individual wall-edge lengths

Individual length factors

Inner supports

Bolt spacerJoint cleats Stock Spacer panelMounting plane

Generated support

Mirrored flat faces

Display options

Exploded viewMounting planesPanel edgesEnclosing base circle

See-through panelsInner supports

Panel measurements and cutting

Panel

Cut	Length (mm)	Bevel (°)

Bevel is measured from square; it is not the panel tilt. Outlines alone do not define additional trims.

About this tool

Plywood-shell geometry for one flat plane or a perpendicular corner. Structural capacity, materials, fasteners, mounting and saw setup have not been verified. Qualified review and physical test-fitting are required before fabrication or installation. Large dimensions do not guarantee panels fit a 2500 × 1500 mm plywood sheet.

Original handoff reference files

Reference GLB Reference panel ZIP Reference report JSON

Geometry only · no structural or load rating